The PS3 8001050f error code is a common problem encountered by PlayStation gamers. If you are not able to play any games of your own or play any downloads from the PlayStation store even before its expiration date, then you might be facing this error. Alternatively, if you experience missing trophies and notice the time and date reverted to January 1, 2000, you probably have error code 8001050f.

What is the PS3 Error code 8001050f?

8001050f is a kind of error that is caused by the digital clock that is in the internal part of your PlayStation hardware. According to the manufacturer, this error was a result of Playstations around the world falsely assuming that February 2010 was a leap year. A certain bug that affects the internal clock and is called the trophy registration error by the manufacturer causes the error.

When this error came out, PlayStation 3 owners were advised to avoid using the game console until the problem was fixed. PS3 slim gamers were not affected by this error. As a result, the PS3 trophy data and other game data were lost and no longer recovered by the user.

How to fix the PS3 8001050f?

First of all, you need to save all your game data on your thumb stick and then delete it from your PS3. Then turn off your gaming console and allow it to rest for a few minutes. You need to then restart your PS3 and fix the errors by the methods below and then copy all the games back to your PS3.

Fix 1). Change date/time directly on your console

Select Settings on the Xross Media Bar( XMB) and click on Date & Time Settings. You need to change the date to any date after February 28, 2010. You can now use your PlayStation to play all the games that you want.

Fix 2). Change date/time through the Internet

Connect to the internet through the WLAN and use the Browser function on your PS3. Go to settings and select Date and time settings. When you are in these settings, choose to ‘Set via Internet’ and change the date to any date after Feb 28, 2010.

Fix 3). Fixing by opening up your PS3

Unplug your PS3 and open up your console to locate the internal battery. By doing so, you will be void of the warranty if it is still valid. The battery would be present under the motherboard on the side near the USB inputs. Remove the battery for a few minutes and replace it and assemble the PS3 back. Boot the system and set the correct date/time and everything should be fixed.

After following the above steps, you will have a good chance of fixing error 8001050f on your PS3.

In reviewing numerous law office case management software packages, we’re constantly amazed at the number of over-priced packages that have “automatically creates a case number” high on the list of features as if it’s a difficult thing to do, or even impressive as a package feature. Too, most of these packages simply create a 6-digit number and start at 000001 then go to 000002 and so on and don’t allow you to customize.

We suggest that case numbers should be codes that tell you much more than a simple number does, but at the same time, should have a simple format so you can easily create them and read them on the fly.

Let’s look at a simple yet informative case number:

20100310-FL-CC-JS-009

Let’s break this down a bit:

1. 20100310 is the date. Use the descending date format since it’s easier to look up cases with a time-frame reference. Descending dates are arranged starting with the year, then month, then day, so in the example above, the case was started on March 10th, 2010.
2. Next, is a two-letter code of your choice that indicates what type of case this is. In our example above, “FL” stands for “Family Law.” Here are some suggestions: CL – Contract Law, PP – Product / Process, CD – Criminal Defense, etc. You can skip this if you only practice one type of law.
3. Your Sub-Code is a second two-letter code clarifying the type of case. In our Family Law example above, “CC” stands for Child Custody. Create a list of applicable sub-codes and keep these listed in a “reference file” along with your case-type codes from # 2.
4. Using the client’s initials as part of your case number is optional depending on the sensitivity of the case and the client’s desire for anonymity. In our example, we made up the name “Jane Smith” and used JS. We certainly do not recommend using the client’s name in the case number.
5. If you have a client that may provide multiple cases, put the actual number of the case for that client in parenthesis. In this example, this would be our 9th case for Jane Smith. If this is a single case with little chance of repeat business from this client, you won’t need to put any numbers at the end.

Hints and Tips:

1. When creating a case file number, use it when naming word processor or spreadsheet files so everything can be searched and/or called up using the case number. Also, write the number on any folders and use it on stickers that might go on CD / DVD cases, cassette tapes, evidence boxes, etc.
2. Naming your computer files also makes it easy to search since most systems will let you search for part of the file name using some sort of “wild card” such as the asterisk*. For example, if you wanted to see a listing of all Family Law cases in 2010, you’d enter the search string 2010*FL*.doc (if you were searching for Microsoft Word ® files). Not only that, but simply listing them by file name will automatically show them in chronological order by virtue of their case number alone.
3. Rather than buy complex and over-priced software packages, you can easily use the software that probably came with your computer such as your word processor and spreadsheet mentioned above, and a calendar / contact program such as Microsoft Outlook ®.

Next, to learn more about case management for paralegals and attorneys visit: www.theattorneycasefile.com.

(Copyright 2010 – Paul Purcell. Permission granted to share this article provided all portions remain intact.)

The 2008 to 2012 global recession resulted in a landscape of abandoned homes in many neighborhoods across the United States due to the crisis that severely impacted the real estate and financial markets. Although very few communities were spared the negative effect of scattered vacant and unmaintained homes, this large spread dilemma impacted many urban areas more significantly as residential property values and socio-economic conditions were already compressed by limited personal household and public resources. But this rise in properties that once were homes to families known and seen to neighbors that now had become edifices of visual neglect, unsafe locations, and prime targets for eventual squatting, created an environment for widespread concern and reaction from all levels of government. At the local government level, one by one, each jurisdiction began adopting new policies and implementing programs in an effort to curtail the problems associated with extended periods of property maintenance neglect caused by the abandonment by owners, and seemingly lackadaisical response by the financial institutions that became responsible for those assets.

Control in a Changing Neighborhood Environment

Code Enforcement agencies immediately responded to the distress calls and complaints from neighbors and community leaders that had become desperate to try to eradicate the problems associated with the conditions of these abandoned homes, but quickly became overwhelmed both by demand for services and funding necessary to provide adequate property maintenance and nuisance abatement. Vacant property registration programs quickly found their way into local legislation that shared common requirements for mortgagees or ‘banks’ to step in after a property was abandoned by their owners and take responsibilities to provide proper responsible party information, local property management, routine maintenance and security. These registration programs, due to the requirements imposed on the banks, actually provided a sense of structure and control that was needed in order for the banks to properly respond and for communities to feel a sense of control. While these programs were highly effective, the slow turnover rate of these properties to new owners, still left neighborhoods with homes that are visibly unoccupied, not well-maintained, and subject to continuous vandalism and trespass.

The economic decline also hit property owners of homes and rentals who walked away from properties where there were no mortgages leaving no interested parties to immediately step in and take responsibility for maintenance adding another level of concern for areas that were already economically depressed and dealing with higher incidents of criminal activity. In a response to citizens to create safer communities and increase livability, one of the theoretical tools used in the practice of law enforcement, the broken windows theory, is making its way into the thinking of how to attain environments free from visual signs of neglect and public nuisances through its application to code enforcement efforts.

The Broken Windows Theory

The broken windows theory is based on the premise that unimpeded disorder in urban communities leads to additional crime and anti-social behavior. This criminological theory was introduced in 1982 by two social scientists, James Q. Wilson and George L. Kelling. Prior to this viewpoint on crime, many police agencies focused their attention unmistakably on crime fighting and addressing more serious crimes while petty criminal behavior seemed more inconsequential, time consuming, and unrelated to major criminal activity. The centerpiece of this ideology is the picture of an abandoned structure with broken windows. The term ‘broken windows’ does not necessarily mean that properties in disrepair lead to more serious crimes being committed by individuals but rather as a metaphor for an urban environment of disorder. Therefore this theory may be easily misinterpreted to mean that if an environment is eradicated of visual blight then more serious crimes will not occur, such as robbery or murder, which has been the center of much debate since the introduction of this theory. In fact, the theory in a literal sense would be demonstrated by the existence of a few broken windows on a structure that remain in disrepair, leading to additional disorderly conduct and more windows being broken, litter being thrown on the property grounds, graffiti, and vandalism, eventually leading to more major crimes such as squatting, drug use, fires, and even rape or murder at that structure. When this theory was applied to law enforcement in New York City in the mid-1980s, the focus on addressing disorderly criminal behavior targeted graffiti, toll-machine jumping, public drinking, panhandlers, and prostitution. While these all seemed to be minor crimes in comparison to the robbery, burglaries, murders, and drug dealing for example, the application of the theory was that cracking down on these small offenses, worked to create a more orderly environment that people would more readily see and that would create an atmosphere where people would be less tolerable of disorderly conduct. Persons that routinely perform minor criminal acts would be held responsible by coming into contact with law enforcement officials more frequently and would not commit more serious crimes. In addition, citizens would feel more comfortable reporting crime to law enforcement more frequently if they felt that there concerns were not viewed as petty or a waste of time. This would lead to citizens feeling more sense of control and order in their communities.

Misapplication of Theory to Code Enforcement

Like the examples given previously regarding abandoned homes, the environment that exists due to persistent poor conditions create unfavorable settings that challenges the norms that we all live by through our codes, creates a feeling of disorder, and promotes an atmosphere that leads to further deterioration and neglect. When public administration practitioners try to apply the broken windows theory to code enforcement, it is easy to mistakenly implement programs where the belief is that increased attention to addressing code violations for minor code violations such as property maintenance, landscaping, and improper parking will lead to more safer and attractive neighborhoods. While there is no doubt that a direct relationship does exist between increased attention on obtaining adherence to property maintenance codes results in more attractive communities, this is not the premise of the theory of broken windows but rather just a causal relationship between the attention of code enforcement regarding a particular area and the result from obtaining compliance. Any area where code enforcement is focusing its attention will most likely attain positive results. However, cleaning up a neighborhood that has not improved its socio-economics may not necessarily lead to an environment where code enforcement staffing levels or attention may be reduced without the risks of recurrence of code violations over time. In fact, if priorities have to shift or resources are reduced and a neighborhood is left unattended, without other controls or incentives in place, code violations will most likely start to increase until more attention is given again. The cause for this is simple as the core of any group, neighborhood, or community is made up of people. The environment or landscape is believed to communicate messages to people as human behavior and various other factors have to be taken into consideration in addition to the built environment to achieve the desired results and maintain them.

Applying the Theory to Code Enforcement

At the core of the theory of broken windows is the effort required to address social disorder. The main premise of the theory is that minor crimes can lead to more serious crimes if left unaddressed. However, the minor crimes that are addressed are those that are considered to be inclusive of disorderly conduct. The regulations, codes, and laws that are put into place by governments, help create the environment of norms that we live by. The typical homeowner association deed-restrictions or rules are examples of a close level of control and order that is put into place in a community by the community members that are designed to establish and provide a safe, well-maintained environment for its residents. While these rules often may be viewed at as extremely strict or limiting on personal freedoms at the home, they do serve as the norms for persons in the community in which they live that creates and informal bond shared by everyone. A simple requirement that every property owner pays monthly dues that includes standard alarm monitoring for each home or requiring a gate card access in order to enter the neighborhood provides an added level of safety that everyone can participate in which deters criminals from targeting homes in that community. When it comes to code enforcement, a simple regulation that limits what residents may store on the exteriors of their homes, may create a safer and more orderly environment that can provide peace of mind to residents in an area susceptible to environmental conditions involving high winds, tornadoes, or storms by reducing airborne projectiles that can cause damage to property or even loss of life. When it comes to urban communities that are dealing with higher incidents of criminal activity or public nuisances and behaviors, applying the broken windows theory to help reduce these activities has to be done in a strategic and targeted manner.

Specific Strategies

Enforcement efforts geared towards addressing instances of disorder should be the principal focus. Likewise, regulations that are put into place to eliminate disorderly behavior, activities, and appearances have to be enforced in a consistent and expeditious manner. While focusing on property aesthetics has a high value, residents and business owners who are exposed to abandoned properties, illegal uses, unlicensed activities, and crime, are much less likely to feel safe or willing to make further investment into their homes and businesses and may rather look towards getting out of that environment when possible. Priorities should always be established in conjunction with stakeholder input in order to focus the attention of code enforcement on solving specific problems that promote disorder. A mutual understanding has to be in place, especially if your jurisdiction has to balance limited resources as not all violations will be able to be given the same high level of attention by code enforcement staff. Together, most community members can develop programs and foster environments of compliance with the code through alternative methods and programs. Here are some programs and ideas that may provide assistance to code enforcement officers by augmenting their efforts to allow them to focus on other priorities:

• Registration and maintenance requirements for abandoned and vacant properties.

• Landlord registration and inspection programs for rental properties.

• Low cost lot clearing programs for owners of vacant lots performed by local public works or vendors on a routine basis.

• Good neighbor post cards for distribution by neighborhood civic associations.

• Volunteers.

• Use of other government field staff trained to identify code violations and provide public information or courtesy notices.

• Cross-training of other staff to increase enforcement authority of agencies with similar code enforcement needs such as public works, engineering, public service aides, fire departments, building inspections, zoning, environmental, health agencies, social services. Examples: A social worker that visits a home that is poorly maintained may be trained to identify minimum housing standards and provide a courtesy notice that will later be referred to code enforcement or a housing assistance program if not corrected. A public works employee that notices a trash pile that was illegally dumped on a privately owned vacant lot who is authorized to request an immediate pickup of the trash or post a notice of abatement for the property owner.

• Homeowner and Business Owner manuals and guides that provide code compliance information, assistance programs, and contact information for other regulatory agencies.

• Signs throughout neighborhood indicating certain restrictions such as prohibited commercial vehicle parking, storage of inoperable vehicles, bulk trash rules and timeframes.

In code enforcement, if code officers were to become very nitpicky in what codes are enforced and community members were to feel that inadequate attention is being given to more serious ones, it probably wouldn’t take long before complaints to the local government come pouring in from voters and a refocus sought by local officials and political leaders. As with the application of the theory to crimes, it is not just focusing attention on minor crimes, likewise minor code violations, but the type of minor issues chosen to be addressed that is key. The goal is to link code enforcement efforts with a theory that is based on crime prevention through the appearance of a well-maintained and orderly environment. While residents who are aware that minor code violations are treated seriously should become hesitant to commit more serious violations, chances are that this may not be the case. The elimination of minor violations may not prevent more serious crimes or code violations from occurring when you take into consideration the factors related to the more serious offenses such as economics and opportunity. In criminology, one of the most significant deterrents to criminal behavior is the lack of opportunity and reduced chance of getting away with a crime. This is why it may be more unlikely that a person will illegally park a car in their gated community if they feel the chance of it being towed is extremely high. If your jurisdiction does not have enough staff to address all minor violations in a quick and expeditious manner all of the time, chances are that those efforts will only be effective during focused operations such as sweeps, but will not be sustainable to create long term change. So the best approach to applying the broken windows theory to code enforcement would be to focus attention on those violations that would be considered to promote disorder and look for other opportunities to augment your program to address minor violations.

Here are just some examples of code violations that when left unchecked, may allow similar behavior to proliferate and contribute to more serious violations:

• Unmaintained abandoned homes

• Storage of Junk Vehicles

• Graffiti

• Illegal Dumping

• Open storage of junk items

• Bulk trash improperly placed throughout neighborhood

• Unauthorized use of vacant lots for social gatherings of other unpermitted activities

• Public nuisances and noise disturbances

• Unlicensed rooming houses and substandard housing

• Illegal uses such as unlicensed social clubs operating from residences

Similar to law enforcement crackdown on activities such as drug dealing and prostitution, code enforcement also has to concentrate its effort towards solving and eliminating certain problems affecting a community to promote stability and a safe environment. Significant reduction of the above problems may promote and foster a sense of community pride and change behaviors and attitudes towards residents own compliance efforts and encourage investments in property enhancements.

Conclusion

The broken windows theory has had numerous critics, since the years it was introduced, by other theorists and social scientists either totally contradicting the theory or discrediting its actual application in being responsible for reducing crime. A study done by Robert J. Sampson and Stephen W. Raudenbush provided the argument that crime was not caused by social disorder but that the lack of cohesion of residents and their tolerance of lack of control of social spaces within a community actually contributes to the crime rate. However, as in law enforcement’s efforts to reduce crime, there usually is no silver bullet approach and crime prevention requires numerous strategies from Crime Prevention through Environmental Design (CPTED) to Community Policing. In code enforcement, economic rejuvenation and surges in the real estate market and lending has helped to eliminate blighted properties not directly related to addressing indirect code violations. Also, changes in personal financial situations often may have a direct effect on a person’s ability to correct or prevent code violations. Since it is typical that the majority of persons correct code violations once they are made aware that a problem exists, attention is the most important factor with keeping properties in compliance with maintenance codes. If an effort to reduce crime through applying the broken windows theory is sought, the use of code enforcement should be focused on addressing those violations that contribute to a disorderly environment versus the common code violation for aesthetic violations. Use of police records to identify locations of high volumes of police calls may show properties, that from the outside, do not appear to have any major violations, but the illegal use of the property may be a contributing factor to crime occurring in the community or at least a location that may be taxing law enforcement resources. While any effort to improve the appearance of a community will reap rewards, the reduction of crime and feeling of safety for members of a community is directly related to the removal of those specific areas or ‘hotspots’ that are the contributing to the disorder and criminal element. The elimination of those properties that are the most blighted and in major disrepair or abandoned, will reap benefits beyond just the improvement of the quality of life of the adjacent neighbors, but an increase in real estate value as just the mere existence of abandoned homes and deteriorated structures has a direct and negative impact on the community and how it is perceived by others.

Overview

Many companies have a sequential job numbering system, but have you considered the possibility of altering the numbering sequence so you can pull reports for a certain type of project or projects by year and the informational reports that could be generated?

And, are your cost codes sufficient to cover the details you need to see in your reports? Do you lump all site related travel and subsistence into one code, or do you have the details of hotels vs. housing and meals vs. subsistence?

Not all software programs are sophisticated enough to allow for customized job type numbering sequences; however, even the basic job cost software systems can be adapted to allow for an advanced numbering system.

Specific Job Numbering Sequences

Advanced reporting techniques can yield a wealth of information. How jobs are numbered can ease the reporting burden so projects of a certain type and/or year can be easily pulled from the software. Samples of numbering sequences could be based on the following criteria:

· Year project was awarded

· Public vs. private works

· Commercial vs. residential

· Construction vs. service

· Division(s) of the Company

If your software allows, you may start the job number with the year awarded, followed by the job type and then a sequential number. Management may request a report for gross revenue on all the commercial tenant improvement projects in 2013. If you have a numbering sequence, this would be an easy report to pull, rather than go through all your 2013 projects and manually add the numbers to obtain the results.

The job cost master file is another good source of information if all fields are completed and there is a common usage of custom fields that can be used to pull reports.

Cost Codes – Too few or Too Many?

Often we see cost code lists that spill onto multiple pages. Most job cost software programs allow for use of one cost code for multiple categories (Labor, Materials, Direct Job Expense, etc.).

A good source to use for establishing a cost code list is the bid recap and detail sheets used when bidding projects. This will yield the different stages of labor, types of materials to install associated with that labor, the different types of equipment to be rented, categories of subcontractors and the details of direct job costs to be incurred.

These activities can be “numbered” to establish a list of cost codes. If the software allows for use of one code across multiple categories, give thought to not duplicating descriptions, but arranging codes together by “type” of work being performed, rented equipment, direct job expenses, work typically subcontracted out, etc.

Keeping your cost codes consistent will then allow even more sophisticated reporting – management can now ask for all commercial tenant improvement projects in 2013 and the total cost of crane rentals for the year on those specific projects.

Why Go Through These Steps?

History is a great source of information when predicting the future. Cost details can be analyzed for specific types of jobs when preparing to bid a similar project. Historical information can be analyzed for margins on certain types of projects or a division of the company to make decisions on whether or not a certain type of work is profitable.

If fields are available in the job cost master file, reports can be pulled not only by type and year but by project manager as well to look at performance and estimate vs. actual results.

Conclusion

When developing any numbering system, consistency is important in order to maximize the reporting results. Management should determine the information they wish to see and develop job numbers and cost codes that will allow for advanced reporting not only to themselves but provide useful information to estimating, project managers and accounting as well.

If you have been pissed off by your newly bought induction cooker, then you need not worry anymore as I have made the solution available for you. If in case your device or the induction cooking machine does not work or function properly or if the quality of food goes insufficient, then you may read the article further. If this article is unable to solve your problem, kindly contact to your respective brands’ service centre, or its Consumer Care Centre in your country.

Now you may go with the different problems that may take place in your machine to which the solution has been given.

1. When the power button does not respond to On/Off command, it means that there is a connection problem. Do check whether the induction cooker is connected to the mains and the plug is inserted firmly into the wall socket or not.

2. When the appliance beeps continuously and suddenly stops working,it happens when unsuitable cookware is kept on the cooking plate or if the cookware has been removed from the cooking plate during cooking. Ensure that the cookware is made of steel, iron or aluminium with stainless steel cladding base with a diameter larger than 12cm.

OR

The cookware was placed outside of the cooking zone by you.

3. When the cookware is not getting heated up to the required temperature, this situation arises when the bottom of the cooking utensil is not flat. So use a flat bottom cookware. If the problem persists, consult your brands’ dealer or their authorised service centre.

4. When the appliance is not switching from one preset mode to another, in this case, turn off the machine and restart with another cooking mode.

5. When the cooking temperature of preset modes either becomes too high or too low, in such a case, switch to manual mode for better control of temperature. You can even adjust the cooking temperature in the following modes: – manual, roti/dosa, stir fry and pressure cook.

6. After pressing one of the buttons of cooking mode, the light of the selected mode does not glow, in this case, the light has become defective. Consult your brands’ dealer or their authorised service centre.

7. When the cooking temperature changes automatically in some preset modes, the cooking temperature changes automatically in gravy mode only. For better control over the temperature switch to manual mode.

8. If the fan starts working without the appliance being started, press a cooking mode button after you have pressed the central (On/Off) button. If you do not press any of the cooking style buttons within one minute, the induction cooker will turn off, and the fan continues to work for a while to cool down the machine.

Error Codes and their Meanings

1. E1 or E2: The primary sensor is in short circuit or open circuit state. Consult your brands’ dealer or their authorised service centre.

2. E3 or E4: When this error code is displayed on screen it means the heat sink sensor is either in a short circuit or open circuit state. Ask your brands’ dealer or their approved service centre.

3. E5 or E6: The voltage is sometimes too low or too high. Wait for the voltage to stabilise and try again.

4. E7: The fan has a malfunction. Consult your brands’ dealer or their authorised service centre.

5. E8: The primary sensor is not working. Ask your brands’ dealer or their approved service centre.

6. E9: The fuse has malfunctioned. Ask your brands’ dealer or their supported service centre.

I hope this article solves your problem out.

If your clinic or office is established as a facility by the insurance company, you are required to file your medical insurance claims on UB04 forms rather than CMS 1500 claim forms. Many providers’ claims are denied because they are filed on CMS forms. These offices don’t know what to do as they not familiar with the UB04s.

UB04 forms (formerly UB92 forms) are quite a bit different than CMS or HCFA forms and require different information. They can be very confusing, but it is important to complete the UB04 correctly if you expect payment from the insurance companies.

Rev codes, type of bill, and value codes are required on the UB form. These are all new to those of us who have only completed CMS 1500 forms. You must be able to figure out what to put in these fields to complete the claim properly.

Many of the insurance carriers have different requirements for what information goes in each box on the UB04 form. For example, one company may require a certain rev code for the service you are billing for, while another company may require a totally different rev code for the same service.

We bill for an outpatient drug and alcohol rehab facility. BCBS requires rev code 945 but UBH requires we bill it with rev code 0513. It is exactly the same service but if we want the claim to be paid, that’s what we have to do. It is important to know the different requirements for each of the insurance carriers that you bill to.

If one required box is not completed, the claim will be denied by the insurance carrier. If CPT codes are entered instead of Rev codes, the claim will be denied. It is not difficult to get UB04 claims paid, it is just necessary to understand what the required information is.

Make sure you know how to complete these forms correctly so you will receive maximum reimbursement for your insurance claims when you are required to use the UB04 form.

Copyright 2008 – Alice Scott

In 1462 Cosimo Medici established the rebirth of the outlawed Platonic Academy in Florence and appointed Marsilio Ficino as its founder. Ficino’s fundamental concept, derived from Plato’s geometry, was about the existence of eternal wisdom of the immortal soul being central to the functioning of the universe. The only geometrical logic that can possibly accommodate such an idea is fractal logic, which, in 20th Century science could not be linked to any sort of life science whatsoever.

Did the Medici scholars of the 15th Century commission Italian artists to place hidden messages of pagan science into paintings that are now used to develop pagan technology today? A rather strong case argues that this is quite correct. We can conduct an investigation by examining two paintings commissioned by the Medici scholars, Sandro Botticelli and Domenico Ghirlandaio. Both the paintings were completed in Florence during 1480.

It is common knowledge that Botticelli’s Graces danced to the Pythagorean Music of the Spheres, imitating divine reason and cosmic order. Botticelli played a rather dangerous game by his habit of painting prominent Christian figures into the fabric of such a world-view reality. In his painting of St Augustine in His Study, Botticelli was definitely flirting with disaster. He disregarded Augustine’s classification of the Pythagorean celestial mathematics embracing Epicurus’ atomic structure within the human metabolism, as the work of the Devil. By painting a spherical brass book stud to depict the atom of the soul, Botticelli carefully placed it into the orbit of Augustine’s halo, which, as a symbol of consciousness, linked divine reasoning with the Music of the Spheres.

There is no doubt about the heretical meaning of the painting. A book behind Augustine’s head is clearly opened to display a page of Pythagorean mathematics. To the right an astrolabe for observing celestial bodies is depicted and to the left is an armillary sphere, which is a model of celestial movement. Augustine’s concentrated gaze is directed upon the celestial movement model depicting a geometer in deep philosophical thought. Celestial movement transferring divine evolving wisdom to the soul through harmonic resonance describes the scientific ethos of the 3rd Century BCE science of universal love. The scientist Giordano Bruno taught about this at Oxford University before he was imprisoned, tortured and burnt alive120 years after Botticelli painted his now famous painting with the same hidden message.

Ghirlandaio’s painting of St Jerome in his Study depicts Augustine’s 5th Century colleague, who was also a prominent figure in the Christian religion. We realise that Botticelli did not place his spherical image book stud into Augustine’s halo by mere chance because the device was very carefully repeated by Ghirlandaio placing a spherical book stud image into his own orbit of St Jerome’s halo.

The question as to whether this artistic depiction of pagan science influenced modern science is easily answered as yes.

The Science-Art Research Centre of Australia, once alerted to Plato’s spiritual optics by realising what Botticelli had attempted to depict, was able to draw up a research program to modify the optical key to Lenardo da Vinci’s Theory of Knowledge. The 1991 Nobel Laureate in physics was awarded to Pierre de Gennes for his liquid crystal optics theories. The relevant discovery of a vast new science and technology by a research team the following year validated the nature of the technology that the Centre had predicted. The principal discoverer, wrote that the Centre’s work encompassed a revolution of thought as important to science and society as the Copernican and Newtonian revolutions.

The Science-Art Centre instigated a highly successful research program during the 1980s to develop futuristic simple life form computer simulations based upon a Music of the Spheres methodology suggested by China’s most highly awarded physicist, Kun Huang. This research has now advanced to embrace futuristic human survival simulations. Plato’s spiritual optics engineering principles have also been advanced into life energy concepts that are basic to a new life science instigated by the three 1996 Nobel Chemistry Laureates.

The NASA High Energy Library has published the proposition that the Classical Greek Era’s life science was based upon fractal logic. However, the linking of any life science to fractal logic is still considered by some to be a criminal heresy and such a concept remains in total defiance of Einstein’s 20th Century understanding of the energy governing modern science itself.

Copyright © Robert Pope 2010

What is Windows error code 37?

Frequent system freezing and system errors are very common cause of concern for several users of Windows. Almost every time system errors occur and displayed on the screen informing the user about the error. These errors are very helpful in fixing or troubleshooting it efficiently. The errors are generally technical in nature and needs great amount of consideration if user needs to fix it. Among several such errors, error code 37 is one of then that occurs when the concerned device is not connected to the system correctly and then the driver is faulty. This error is very common with ‘Add & Remove USB Devices’ and ‘Video & Sound Cards’ as it does not allows the user to use the device installed.

What are the causes of Windows Error Code 37?

On analyzing the error and diagnosing the system a bit, experts have concluded that this error is typically caused when the hardware which is being used is incompatible to the system. The error message that is thrown by the system is very much similar to the error message as mentioned below –

“Windows cannot initialize the device driver for this hardware. (Code 37)“

How to fix Windows error code 37?

In order to resolve this error message first try to reinstall the device driver due to which error has caused and also see that the device is properly connected to the system. To do this check each and every cables is properly connected and the entire component inside are properly accounted. To re-install the device driver click ‘Start’ > ‘Control Panel’ > ‘Device Manager’ and then locate the damaged one and uninstall it. Once uninstalled, install the fresh copy and remove if any corrupt or damaged parts were found.

As a second step to fix error code 37 try to clean the registry by fixing any errors and problems that is has. Windows Registry is very important component of Windows systems which acts as the central database and stores and manages different files and folders installed in it. Every device before initializing fetches the valid files and information from the registry so that it can initialize and work properly. So, cleaning the registry will certainly help user to get rid of error code 37.

All the people that work and reside in the United Kingdom have a tax code that they received from the HM Revenue and Customs. The purpose of this tax code is simply to tell you the amount of allowances that you are entitled to, and hence help you in determining the amount of tax that you are expected to pay. Despite the fact that many people do not really pay much attention to these codes, it is important to note that knowing and understanding your tax code can be beneficial to the extent of helping you determine whether the government owes you some tax rebate.

Today, we are going to look at how you can calculate the amount of taxes that you will be expected to pay if at all you are under the tax code 653L.

Determining The Tax Free Allowance

The first step towards determining the amount of taxes is determining what your tax-free allowance is. In the case of someone whose tax code is 653L, the tax-free allowance will be:

653 X 10 = 6530

Here, the tax free allowance is 6530 pounds which is arrived at by taking the figures from the code and then multiplying the amount by 10 giving you 6530 pounds. When calculating your annual tax payable, the first 6,530 pounds of your income is not supposed to be taxed. This means that if you earn 6,530 ponds or less, you will pay zero tax; however, any single pound on top of this figure will be taxed at the rate that has been stipulated by the HM Revenue and Customs.

The Tax Rebate

As we have indicated above, knowing your tax code can help you know whether or not the Revenue and Customs owe you some money. But how does this come about?

Well, since as an employee, you pay your taxes through the Pay As You Earn scheme, the annual tax free allowance will not be used, but the monthly allowance is the one that will be used. The 6530 is divided by 12 months giving you a monthly tax-free allowance of 545 pounds. In coming up with the figure of 545 pounds, it is assumed that you will be earning a constant amount during the tax year. Now, imagine a scenario whereby you were employed from January to March, but then you lost your job and were unemployed during the year. The total amount of tax free allowance that you would have actually utilized would only have been 1635 pounds, and not the 6530 that you are entitled to. For this reason, you will need to ask the HM Revenue and Customs to refund you any monies that they owe you.

Magento 2 has been introduced in the market already and has come up with many new and improved features and functionalities for the e-stores. With more new in-built extensions and responsive themes, the platform has also turned out as the best platform for eCommerce development. Moreover, version 2 is more flexible and scalable than the previous version. This has made many businesses go for Magento 2 development. And even the e-stores that were built on version 1 have already migrated to this new version to leverage the most out of it.

Some of the highlighted features of Magento 2 are varnish support, cache CSS preprocessing, JS and CSS minification, a quicker and streamlined checkout, in-built full-page caching, and more. All these are the significant features and upgrades that have inevitably put version 2 at the top of the list of eCommerce development platforms. However, it is important to get familiar with a few tips and practices to make the most out of these features of Magento 2 and to let your online store perform high and get your store easily found on the web.

Here are the tips and best practices for Magento 2 web development you need to know in 2021.

Maintaining the Magento 2 code standards:

Following the code, standards are highly important when you are working with Magento 2. Not maintaining the standards of the codes can simply make your project and your codes vulnerable to errors and complexities. Due to the poor quality of codes, the performance of your codes and the store can also get affected negatively. So, maintain the standard, quality, and well-aligned codes.

Reusability of the codes:

Reducing code redundancy is one of the best ways to boost the performance of an e-store. Reusing the codes or the practice of code reusability can help in improving the performance of your store when you are using Magento 2. In this case, you can just create a single method or class containing a code and then can use the class or method name wherever you want to implement the same code or logic. This also reduces effort and time, while letting you maintain a high-quality coding structure.

Avoid creating a Helper Class:

Helper classes comprise static classes, which are specific to the same classes. This means you cannot use these helper classes in the other classes. These classes also go against the concept and principles of OOP or Object-Oriented programming. So, instead, you can refactor the classes into functions that can be used in the other classes.

Also, these Helper classes contain multiple functions for solving multiple problems and end up eliminating the principle and concept of solving a single purpose. Hence, the codes must be written in a way that every class contains the specific functions only for that class.

Override layout:

In Magento 2, rather than copying an extensive page layout and configuration code and then modifying the required changes in the codes, you can only just create the extending layout file containing all the changes you need.

For instance, say you want to change and customise the layout that is defined in this file ‘view/layout/product_catalogue_view.xml. You can simply add the extended layout file with that same name in the custom theme like, ‘Magento_Catalogue/layout/product_catalogue_view.xml’.

Clear the cache:

It is always recommended to clear the cache every time you are making some changes and want to reflect the same at once.

Keeping these tips and practices in mind is important for every Magento 2 developer, both the newbies and the experienced professionals to end up with a striking and high-performing webstore development every time.